SIP Test Call Parameters
The SIP Signaling Test Call parameters are described in the table below.
SIP Test Call Parameters
|
Parameter |
Description |
|---|---|
|
'Test Call DTMF String' configure troubleshoot > test-call settings > testcall-dtmf-string [TestCallDtmfString] |
Defines the DTMF tone that is played for answered test calls (incoming and outgoing). The DTMF string can be up to 15 strings. The default is "3212333". If no string is defined (empty), DTMF is not played. |
|
'Test Call ID' configure troubleshoot > test-call settings > testcall-id [TestCallID] |
Defines the test call prefix number (ID) of the simulated phone on the device. Incoming calls received with this called prefix number are identified as test calls. This can be any string of up to 15 characters. By default, no number is defined. Note: The parameter is only for testing incoming calls destined to this prefix number. |